SAE Y Cable Extension - 2 Pole Flat connector lead ends

 

When the "dual ends" or "dual "inputs" of this Y-split extension cord are plugged into the output SAE 2-pin connectors of power sources such as portable solar chargers...the result will be that of power sources wired in parallel, i.e., amps are additive (volts are not).  The "single output" SAE 2-pole connector will be "hot' (+) positive on the "protected" female side...as it should be coming from a power source...such as a portable solar charger (or battery). 

 

Approximate overall length = 4 feet long / Trunk approximately 1 foot long / Legs approximately 3 feet long

Intended for use to power and charge portable and handheld electronic devices (not intended for use in conjunction with a battery tender or battery charger).

Applied / drawn current must be less than 3 amps.  Do not attempt to apply or draw greater than 3 amps through this cord.

Buyer responsible for proper application, connection, and use...including the application of proper/adequate fuse protection.

Recommend not leaving this equipment unattended while in use!

Buyer responsible for proper connection and use of this product, including the addition of adequate fuse protection. Please contact us with any questions or concerns !!! Recommend consulting our Blog websites for additional information - Blog format facilitates interaction! Please visit: www.bohemianbiker.com (our longest running Blog with many interesting posts & comments), www.sae2pin.com (our "SAE 2 Pin connector" specific Blog), and www.solarcapitalistllc.com (our Blog for topics related to portable solar chargers). We also welcome email at: solaray@solarcapitalist.com